Description
This I2C relay controller is compatible with all computing platforms.
This controller consists of one relay. The on-board relay is controlled by a MCP23008 using GPIO0. The remaining 7 GPIO pins (GPIO1:7) are available for general purpose TTL/CMOS Input/Output applications under software control.
Controlling the on-board relay is easy: simply set GPIO0 as a Digital Output. Next, set the on/off status of GPIO0 to activate the relays. One LED indicates the status of the on-board relay.
External devices may be wired to turn on when the relay turns on. Optionally, external devices may be wired to turn off when the relay turns on.
This controller includes an on-board I2C expansion port, allowing an easy pathway to expansion for controlling more relays, reading sensors, or expanding to any I2C device we develop in the future. Up to eight MCP23008 based devices may be connected to a single I2C port. The start address of this device is set using 3 on-board jumpers.
Compatibility
This is a general purpose I²C device compatible with all computing platforms and IoT technologies, including Raspberry Pi, BeagleBone, Arduino, Particle, BridgeX5, and many more. All ControlEverything.com devices support a strict +5V I²C Bus standard.
Arduino Nano and Micro Interfaces:
Plug this Device into the Arduino Nano I²C Shield
Plug this Device into any Arduino Nano Master Device
Plug this Device into any Arduino Micro Master Device
Plug this Device into the Arduino Uno Interface Adapter
ESP8266 IoT Interfaces:
Use our ESP8266 Module and the PEI2C Interface Adapter
Use our ESP8266 Adapters for Adafruit and Huzzah
Onion Omega 1 & 2 IoT Interface:
Use our Onion Omega Adapters
Raspberry Pi Interfaces:
Use the Raspberry Pi I²C Interface Adapter
Use the Raspberry Pi 2/3 I²C Interface Adapter
Use the Raspberry Pi Zero I²C Interface Adapter
Particle IoT Interfaces:
Plug this Device into the Particle Photon I²C Shield
Use as Expansion for any Particle Photon Device
Use as Expansion for any Particle Electron Device
Note: All devices above are compatible with Bluz Bluetooth Interface
Pycom IoT Interface:
Plug this Device into the WiPy I²C Shield
BeagleBone Interface:
Use the BeagleBone I²C Interface Adapter
Windows 8/10 PC Interface:
Use the Bridge Series Controller
Resources
SPDT 1 Amp
Datasheets
Documentation
Mechanical drawing
SPDT 10 Amp
Datasheets
Documentation
Mechanical drawing
Wiring diagram
SPDT 20 Amp
Datasheets
Documentation
Mechanical drawing
Wiring diagram
DPDT 5 Amp
Datasheets
Documentation
Mechanical drawing
Wiring diagram
SPST 30 Amp
Datasheets
Documentation
Mechanical drawing
Wiring diagram
Code Libraries
Community Libraries
Power
12-Volt 1.25 Amp Regulated Switcher Supply

International 12 Volt 1.25 Amp Regulated Switcher Supply
