Adafruit Huzzah ESP8266 Compatible IoT Adapter with Integrated USB

  • Plug the Adafruit Huzzah ESP8266 into the CE Host Devices
  • Use I2C Communications to Control CE Devices
  • USB Connector for Power and ESP8266 Programming
  • Uses I2C Pins 2 (SDA) and 14 (SCL)
  • Integrated FT232RL USB to UART Virtual COM Port
  • Sale
  • Regular price $6.95

Description

This ESP8266 device adapter was designed specifically for the Adafruit Huzzah version of the ESP8266, allowing easy plug-in to ControlEverything.com Host Devices.

Integrated USB port allows easy programming of the ESP8266.

The ESP8266 is an incredible platform for IoT application development. Use the ESP8266 for monitoring and control applications using the Arduino Wire Language and the Arduino IDE.

The Adafruit ESP8266 is available from www.adafruit.com.

RevA I2C connections are 2,14( Use Wire.begin(2,14); //to configure I2C)

Compatibility:
This device is compatible with all ControlEverything.com Host Devices designed for Particle Electron.

Companion - Purchasing Limits Apply

These products are sold at a low price in an effort to help our customers gain connectivity to our product line.  Companion products are intended to be paired and used with other products we manufacture, as they perform no useful function on their own.  Any orders that contain only companion products will be canceled to prevent short supply.  Most notably, products found on our web site for $5.95 or lower are typically defined as companion products (though there are a few exceptions).

As a general guideline, we allow one companion product to be purchased for every device with a silicon chip that has an I²C start address, with a maximum of 3 companion products of a single part number.  For instance, you can purchase a Raspberry Pi I²C adapter and a Temperature sensor without any problems.  You can purchase 3 I²C adapters and 3 temperature sensors without any problems.  You can purchase 3 I²C adapters and 20 temperature sensors, but no more than 3 I²C adapters of the same part number. 

Order Limits:

  • We will allow up to ONE companion product without any silicon based controllers per order.
  • We have placed a maximum quantity limit of 3 pieces per companion part number.

Please help us balance the production costs of our low-cost devices and support our company by purchasing devices to go with our companion products, this is the only way we can stay in business.

Compatibility

This is a general purpose I²C device compatible with all computing platforms and IoT technologies, including Raspberry Pi, BeagleBone, Arduino, Particle, BridgeX5, and many more.  All ControlEverything.com devices support a strict +5V I²C Bus standard.

Arduino Nano and Micro Interfaces:
Plug this Device into the Arduino Nano I²C Shield
Plug this Device into any Arduino Nano Master Device
Plug this Device into any Arduino Micro Master Device
Plug this Device into the Arduino Uno Interface Adapter

ESP8266 IoT Interfaces:
Use our ESP8266 Module and the PEI2C Interface Adapter
Use our ESP8266 Adapters for Adafruit and Huzzah

Onion Omega 1 & 2 IoT Interface:
Use our Onion Omega Adapters

Raspberry Pi Interfaces:
Use the Raspberry Pi I²C Interface Adapter
Use the Raspberry Pi 2/3 I²C Interface Adapter
Use the Raspberry Pi Zero I²C Interface Adapter

Particle IoT Interfaces: 
Plug this Device into the Particle Photon I²C Shield
Use as Expansion for any Particle Photon Device
Use as Expansion for any Particle Electron Device
Note: All devices above are compatible with Bluz Bluetooth Interface

Pycom IoT Interface:
Plug this Device into the WiPy I²C Shield

BeagleBone Interface:
Use the BeagleBone I²C Interface Adapter

Windows 8/10 PC Interface:
Use the Bridge Series Controller

Compatibility

This adapter allows you to use your platform with any of our IoT Motherboards (Particle Electron compatible) devices.

Resources

Dimensions: 52.00000 x 31.00000 x 17.00000 mm
Wiring diagram