The OOKF is a Onion Omega Key Fob Receiver/Decoder shield compatible with Linx Technologies MS Series Key Fob Transmitters operating at 418/433MHz (1, 2, 3, 4, 5, 8-Button Transmitters Available Separately). This device is capable of receiving button presses from a remote control up to 750 feet away (when using the 8-Button remote). When a remote control button is pressed, the on-board Valid LED illuminates. In addition, Onion Omega I/O lines are asserted High for the duration of the remote button press. Onion Omega I/O lines return to a low state when the remote control button is released.
Includes RP-SMA Antenna.
The On-Board LICAL Key Fob Decoder is Mapped to the following Onion Omega Pins:
Key Fob Button 0 is Connected to Particle GPIO0
Key Fob Button 1 is Connected to Particle GPIO1
Key Fob Button 2 is Connected to Particle GPIO6
Key Fob Button 3 is Connected to Particle GPIO7
Key Fob Button 4 is Connected to Particle GPIO8
Key Fob Button 5 is Connected to Particle GPIO12
Key Fob Button 6 is Connected to Particle GPIO13
Key Fob Button 7 is Connected to Particle GPIO14
NOTE: Key Fob remotes are security encrypted, and must be paired with the controller prior to use. This is an Overlay Shield and does NOT directly plug into the Onion Omega. This Overlay Shield REQUIRES a ControlEverything.com controller with Double-Row Headers on each side of the Onion Omega module interface. To use an overlay shield, Onion Omega devices are plugged into a ControlEverything.com controller, which has two rows of pins on each side of the Onion Omega module. This shield installs over the top of the Onion Omega, using the outer set of pins of the ControlEverything.com controller to make contact with the Onion Omega module. Please examine photos carefully to see how overlay shields are installed.
This adapter plugs into any of our controllers and adapters manufactured for Onion Omega.
Key Fob remote control transmitters can be found here.
This is a general purpose I²C device compatible with all computing platforms and IoT technologies, including Raspberry Pi, BeagleBone, Arduino, Particle, BridgeX5, and many more. All ControlEverything.com devices support a strict +5V I²C Bus standard.
Arduino Nano and Micro Interfaces:
Plug this Device into the Arduino Nano I²C Shield
Plug this Device into any Arduino Nano Master Device
Plug this Device into any Arduino Micro Master Device
Plug this Device into the Arduino Uno Interface Adapter
Onion Omega 1 & 2 IoT Interface:
Use our Onion Omega Adapters
Particle IoT Interfaces:
Plug this Device into the Particle Photon I²C Shield
Use as Expansion for any Particle Photon Device
Use as Expansion for any Particle Electron Device
Note: All devices above are compatible with Bluz Bluetooth Interface
Windows 8/10 PC Interface:
Use the Bridge Series Controller