16-Channel 8W Open Collector 12-Bit PWM FET Driver for IoT

  • Particle Electron Socket (IoT Motherboard)
  • 16 N-Channel PWM Controlled Open Collector BUK98150-55A 55V 5.5A 8W Power Fets
  • Solid-State 12-Bit PWM Light Dimming of Incandescent or High-Power LED Lighting
  • Designed for Resistive Solid State DC PWM Control Applications
  • I2C Expansion Port for Adding External Sensors or Controllers
  • PCA9685 12-Bit PWM 16-Channel I2C Interface
  • 4096 Levels of Output per Channel
  • Sale
  • Regular price $118.95

Description

This 16-Channel power FET driver allows 12-Bit variable control of high-current loads from a Particle Electron using I2C communications.

This device uses sixteen BUK98150-55A power FETs, allowing cloud control of 16 channels of High-Power LED or incandescent lighting from anywhere in the world.

The BUK98150-55A is capable of controlling up to 55VDC and 5.5 Amps of current (8 Watts of Heat Dissipation), making it an ideal choice for most low-voltage DC lighting applications.

The PCA9685 chip is used as a driver for this controller, making communications easy and expandable to up to 62 devices on a single I2C port.

Take control of your DC lighting from a smart phone using Mobicle.io or develop your own software to control lighting using the Particle cloud infrastructure. The Particle Electron offers cellular communication capabilities, allowing access just about anywhere cellular service is available, use the Particle Cloud infrastructure to stay in communication with this device. Our development library makes it easy to control this device with minimal coding. I2C expansion port makes it easy to add sensors or more controllers to a single Particle Electron.

Technobabble:

This device was designed for proportional control of resistive loads, but may be used for very light inductive applications, such as small hobby DC motors. We strongly encourage customers to use this version with resistive loads as much as possible. This controller is equipped with 16 Open Collector 12-Bit PWM outputs. Open Collector 12-Bit PWM outputs work by connecting an external load, such as a incandescent light or LED to ground under software control. Open Collector 12-Bit PWM outputs are also known as low-side drivers, meaning they connect/disconnect the ground side of an external device. Because the outputs on this controller are open collector, every external load can operate at a different voltage, as long as all voltages are capable of sharing a common ground. See our wiring diagram for connection examples. Not for use with AC power applications. This device requires an external 12VDC Power Supply.

IoT Motherboard Compatibility

This is an I²C Master Device, capable of directly connecting to any of our Cross-Platform I²C Slave Devices using the I²C Output. It is directly compatible with:

Particle Electron
Particle Photon (Particle.io)
Bluz Module (Bluz.io)
ESP8266 Module

If using a Particle module, the PKFR Key Fob Receiver overlay shield may be used.

This device may be converted for direct use with:

Arduino Nano using the Arduino Nano Adapter
Arduino Micro using the Arduino Micro Adapter
Onion Omega 1&2 using the OC Adapter
Pycom WiPy using the WiPy Adapter
Adafruit Huzzah ESP8266 using the Adafruit Huzzah Adapter

This device may be converted to an I²C slave device using the Slave Adapter, ideal for use with Raspberry Pi, Beaglebone, Arduino Uno, and BridgeX5.

Arduino Interfaces:
Use the Slave Adapter and a Arduino Uno Interface Adapter
Use the Slave Adapter and a Arduino Nano I²C Shield
Use the Slave Adapter and plug into any Arduino Nano Master Device
Use the Slave Adapter and plug into any Arduino Micro Master Device

Raspberry Pi Interfaces:
Use the Slave Adapter and a Raspberry Pi I²C Interface Adapter
Use the Slave Adapter and a Raspberry Pi 2/3 I²C Interface Adapter
Use the Slave Adapter and a Raspberry Pi Zero I²C Interface Adapter

BeagleBone Interface:
Use the Slave Adapter and a BeagleBone I²C Interface Adapter

Windows 8/10 PC Interface:
Use the Slave Adapter and a Bridge Series Controller

Resources

Dimensions:
Datasheets
Mechanical drawing
Wiring diagram

Code Libraries

Official Libraries


Electron Overlays

Key Fob Receiver Overlay Shield for Particle
Key Fob Receiver Overlay Shield for Particle Photon & Particle Electron
Regular price $29.95
Read More
RFID Receiver Overlay Shield for Particle
RFID Receiver Overlay Shield for Particle Photon and Electron
Regular price $24.95
Read More
Wireless Interface Overlay Shield for Particle
XBee ZigBee 802.15.4 Wireless Adapter for Particle Photon and Electron
Regular price $1.95
Read More

Motherboard Adapters

Adafruit Huzzah ESP8266 Compatible IoT Adapter with Integrated USB
Adafruit Huzzah ESP8266 Device Adapter with Integrated USB and I2C Expansion Port
Regular price $6.95
Read More
Arduino Micro Compatible IoT Adapter
Arduino Micro Adapter for Particle Electron (PE Series) Controllers
Regular price $1.95
Read More
Arduino Nano Compatible IoT Adapter
Arduino Nano Adapter for Particle Electron (PE Series) Controllers
Regular price $1.95
Read More
IoT Adapter for Windows Bridge with USB and Wireless Interface Port
USB + XBee Adapter for PE Series Controllers
Regular price $29.95
Read More
IoT Motherboard to Slave Adapter
I2C Input Adapter for Particle Series Controllers
Regular price $1.95
Read More
Onion Omega Compatible IoT Adapter
Interface Adapter for Onion Omega 2 and Onion Omega 1
Regular price $5.95
Read More
WiPy IoT Adapter
Interface Adapter for WiPy
Regular price $5.95
Read More

Power

12-Volt 1.25 Amp Regulated Switcher Supply
12 Volt 1.25 Amp Regulated Switcher Supply
Regular price $12.95
Read More
International 12 Volt 1.25 Amp Regulated Switcher Supply
International 12 Volt 1.25 Amp Regulated Switcher Supply
Regular price $16.95
Read More