The AD5667 is a general purpose I2C high-resolution digital to analog converter (DAC) capable of generating a 0-5V voltage output.
With 16-Bit resolution, the AD5667 is capable of finely tuning the voltage output across 65,536 steps, with an individual step voltage of 0.0000763 volts DC.
The AD5667 is equipped with 2 individual output channels and one floating address input, allowing 3 devices to share a single I2C port for a total of 6 channels of 16-bit DAC.
The AD5667 is capable of 3.4 MHz communication speed, making it an ideal choice for programmable gain and offset adjustments as well as programmable voltage and current source applications.
On the Board, LDAC is connected to GND and the Vref is connected to the 5V DC using a solder pad jumper.
This is a general purpose I²C device compatible with all computing platforms and IoT technologies, including Raspberry Pi, BeagleBone, Arduino, Particle, BridgeX5, and many more. All ControlEverything.com devices support a strict +5V I²C Bus standard.
Arduino Nano and Micro Interfaces:
Plug this Device into the Arduino Nano I²C Shield
Plug this Device into any Arduino Nano Master Device
Plug this Device into any Arduino Micro Master Device
Plug this Device into the Arduino Uno Interface Adapter
Onion Omega 1 & 2 IoT Interface:
Use our Onion Omega Adapters
Particle IoT Interfaces:
Plug this Device into the Particle Photon I²C Shield
Use as Expansion for any Particle Photon Device
Use as Expansion for any Particle Electron Device
Note: All devices above are compatible with Bluz Bluetooth Interface
Windows 8/10 PC Interface:
Use the Bridge Series Controller
Our mini modules provide a standardized footprint to simplify the design of your project, and allow for a smaller form factor without sacrificing the plug-and-play ease of use that our product line affords.
All I²C Mini Modules are designed to operate at 5VDC. Using a convenient quick connect 4-Pin plug, devices can be daisy-chained onto the I²C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application.
Pull-up resistors are included with all ControlEverything.com master devices. If you are wiring in your own I²C port, on-board 4.7K jumper-selectable pull-up resistors are available for convenience purposes.
All mini modules are 50.8 x 31.75 mm.