Pressure 10 to 1200 mbar Humidity 0 to 100 RH Temperature -40 to 85 °C Sensor

  • Integrated I2C Pressure, Humidity and Temperature Sensor
  • High-Resolution Module (0.016 mbar, 0.04%RH, 0.01°C)
  • 0 to 100 RH
  • -40 to 85 °C
  • Fully Factory Calibrated Sensor
  • 0x40 I2C Start Address
  • 0x76 I2C Start Address


The MS8607-02BA01 is the novel digital combination sensor of MEAS providing 3 environmental physical measurements all-in-one: pressure, humidity, and temperature (PHT).

This product is optimal for applications in which key requirements such as ultra-low power consumption, high PHT accuracy and compactness are critical. High-pressure resolution combined with high PHT linearity makes the MS8607 an ideal candidate for a number of PHT applications.
This new sensor module generation is based on leading MEMS technologies and latest benefits from Measurement Specialties proven experience and know-how in high volume manufacturing of sensor modules, which has been widely used for over a decade.

Applications of MS8607-02BA01 include:

  • HVAC applications,
  • Weather station,
  • Printers and
  • Home Appliances.


This is a general purpose I²C device compatible with all computing platforms and IoT technologies, including Raspberry Pi, BeagleBone, Arduino, Particle, BridgeX5, and many more.  All devices support a strict +5V I²C Bus standard.

Arduino Nano and Micro Interfaces:
Plug this Device into the Arduino Nano I²C Shield
Plug this Device into any Arduino Nano Master Device
Plug this Device into any Arduino Micro Master Device
Plug this Device into the Arduino Uno Interface Adapter

ESP8266 IoT Interfaces:
Use our ESP8266 Module and the PEI2C Interface Adapter
Use our ESP8266 Adapters for Adafruit and Huzzah

Onion Omega 1 & 2 IoT Interface:
Use our Onion Omega Adapters

Raspberry Pi Interfaces:
Use the Raspberry Pi I²C Interface Adapter
Use the Raspberry Pi 2/3 I²C Interface Adapter
Use the Raspberry Pi Zero I²C Interface Adapter

Particle IoT Interfaces: 
Plug this Device into the Particle Photon I²C Shield
Use as Expansion for any Particle Photon Device
Use as Expansion for any Particle Electron Device
Note: All devices above are compatible with Bluz Bluetooth Interface

Pycom IoT Interface:
Plug this Device into the WiPy I²C Shield

BeagleBone Interface:
Use the BeagleBone I²C Interface Adapter

Windows 8/10 PC Interface:
Use the Bridge Series Controller

Mini Modules

Our mini modules provide a standardized footprint to simplify the design of your project, and allow for a smaller form factor without sacrificing the plug-and-play  ease of use that our product line affords.

All I²C Mini Modules are designed to operate at 5VDC. Using a convenient quick connect 4-Pin plug, devices can be daisy-chained onto the I²C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application.

Pull-up resistors are included with all master devices. If you are wiring in your own I²C port, on-board 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

All mini modules are 50.8 x 31.75 mm.


Dimensions: 50.80000 x 31.75000 x 12.12000 mm
Mechanical drawing
Wiring diagram

Code Libraries

Community Libraries