TMD2671 Infrared Digital Proximity Detector

  • Infrared Digital Proximity Detector
  • Up to 400 kHz Communication Speed
  • Calibrated to 100mm Detection
  • Sale
  • Regular price $15.95

Description

The TMD2671 is a digital proximity detector that includes an integrated LED driver and IR LED.

The proximity detector in this device operates from sunlight to dark rooms and is calibrated to 100-mm.

The addition of the micro-optics lenses to the TMD2671 provides highly efficient transmission and reception of IR energy.

This device offers a communication rate of up to 400 kHz and allows two devices per I2C port.

This Mini Module includes on-board power regulation and PCA9306 I2C level-shifting circuitry to adapt to our 5V I2C standard.

Compatibility

This is a general purpose I²C device compatible with all computing platforms and IoT technologies, including Raspberry Pi, BeagleBone, Arduino, Particle, BridgeX5, and many more.  All ControlEverything.com devices support a strict +5V I²C Bus standard.

Arduino Nano and Micro Interfaces:
Plug this Device into the Arduino Nano I²C Shield
Plug this Device into any Arduino Nano Master Device
Plug this Device into any Arduino Micro Master Device
Plug this Device into the Arduino Uno Interface Adapter

ESP8266 IoT Interfaces:
Use our ESP8266 Module and the PEI2C Interface Adapter
Use our ESP8266 Adapters for Adafruit and Huzzah

Onion Omega 1 & 2 IoT Interface:
Use our Onion Omega Adapters

Raspberry Pi Interfaces:
Use the Raspberry Pi I²C Interface Adapter
Use the Raspberry Pi 2/3 I²C Interface Adapter
Use the Raspberry Pi Zero I²C Interface Adapter

Particle IoT Interfaces: 
Plug this Device into the Particle Photon I²C Shield
Use as Expansion for any Particle Photon Device
Use as Expansion for any Particle Electron Device
Note: All devices above are compatible with Bluz Bluetooth Interface

Pycom IoT Interface:
Plug this Device into the WiPy I²C Shield

BeagleBone Interface:
Use the BeagleBone I²C Interface Adapter

Windows 8/10 PC Interface:
Use the Bridge Series Controller

Mini Modules

Our mini modules provide a standardized footprint to simplify the design of your project, and allow for a smaller form factor without sacrificing the plug-and-play  ease of use that our product line affords.

All I²C Mini Modules are designed to operate at 5VDC. Using a convenient quick connect 4-Pin plug, devices can be daisy-chained onto the I²C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application.

Pull-up resistors are included with all ControlEverything.com master devices. If you are wiring in your own I²C port, on-board 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

All mini modules are 50.8 x 31.75 mm.

Resources

Dimensions: 50.80000 x 31.75000 x 12.12000 mm
Datasheets
Documentation
Mechanical drawing
Wiring diagram

Code Libraries

Community Libraries